Why Is Your AC Running but Not Cooling Properly?

If your AC is running but not cooling properly, you may have an incorrect setting, restricted airflow, dirty coils, a refrigerant leak or an outdoor unit fault. Start by checking the remote settings and accessible filters. If you notice ice, repeated breaker tripping or an outdoor unit that won't start, switch off cooling and book a professional inspection.

Check your AC's cooling settings

Select Cool mode, usually shown by a snowflake symbol. Fan mode only circulates room air, while Dry mode mainly controls moisture and may not cool the room as much as you expect. Set the temperature below the current room temperature and select Auto or a higher fan speed while you check how well the AC cools.

Check whether a timer, Sleep setting or energy-saving function is affecting cooling. On some models, these functions adjust the set temperature or limit cooling output. After you switch on the AC or change modes, wait for the compressor protection delay specified in your user manual rather than repeatedly restarting the unit.

Close doors and windows, and keep the indoor unit's air inlet and outlet clear. Direct the louvres towards where you sit in the room, not towards a nearby wall or curtain. Setting the remote to the lowest temperature won't fix a mechanical fault or make a compressor that's already running at full capacity cool faster.

Check for weak airflow

Hold your hand near the outlet without putting your fingers inside. Weak airflow may indicate a blocked filter, dirty indoor coil, dirty blower wheel or fan fault. Strong airflow that stays close to room temperature suggests a different problem, although you can't identify the faulty part from this check alone.

Dirty filters reduce airflow through the evaporator coil, the indoor coil that absorbs heat from the room. The US Department of Energy explains that clogged filters reduce airflow and that dirt on the evaporator coil reduces its ability to absorb heat.

  1. Switch off the AC and isolate its power supply before opening the filter cover.
  2. Remove only the filters that your user manual says you can clean yourself.
  3. Vacuum or wash washable filters as instructed, then let them dry completely before refitting them.
  4. Replace disposable filters with the specified type rather than washing them.
  5. Restart the AC with the cover closed and check whether airflow improves.

If the filters are clean but airflow remains weak, book an inspection of the indoor coil and blower. Don't spray cleaning chemicals or water into the assembled unit. During servicing, the technician needs to protect electrical parts, sensors and the drainage system.

What to do if your AC has ice on it

If you see ice on the indoor coil or insulated refrigerant pipe, don't mistake it for stronger cooling. Restricted airflow and an incorrect refrigerant charge can both cause freezing. As ice builds up, it blocks more airflow and reduces cooling.

Stop cooling if ice forms. If there's no electrical fault or water near electrical parts, you can use fan-only mode to help the ice thaw. Otherwise, switch off the unit and let it thaw naturally. Protect the area below from dripping water, and never chip away ice or use a heater to melt it.

Clean accessible filters after you isolate the power supply. If ice returns after the unit has thawed and you've cleared any airflow restrictions, leave cooling off and call a technician. Simply thawing the coil won't fix a refrigerant leak, a dirty blower or a faulty fan.

How to check the outdoor AC unit safely

Your indoor fan can keep running even when the outdoor unit isn't removing heat. From a safe, accessible position, check whether the outdoor unit starts when you select cooling and lower the temperature. Look for objects blocking its airflow. Never lean out of a window or climb onto an unsafe ledge to inspect it.

Switch off the power supply before removing loose objects around an accessible unit. Leave the clearance specified by the manufacturer around it; don't cover it or enclose it tightly. If you notice dirt lodged in the condenser coil, the outdoor coil that releases heat, you may need professional cleaning.

If the outdoor fan doesn't turn, or you hear repeated clicking or persistent humming, call a technician to investigate. However, a spinning outdoor fan doesn't prove that the compressor is working. Inverter units also vary their speed, so you can't confirm a fault from sound alone.

Don't open electrical covers or try to push-start the fan. A technician may need to test the power supply, motor, capacitor if fitted, control board or compressor.

Why your AC may still not cool properly

Refrigerant carries heat between the indoor and outdoor coils. It circulates in a sealed system, so your AC doesn't normally use it up. A low charge can result from a leak or an incorrect initial charge. Poor cooling alone doesn't mean your AC needs gas.

Ask for leak testing before refilling if the technician suspects low refrigerant. They should identify the cause, repair any leak, verify the repair and charge the system with the specified refrigerant, following the manufacturer's procedure. On some systems, a pressure reading alone won't tell the technician whether the charge is correct.

If your AC has never cooled the room adequately, ask a technician to assess the cooling load and installation. Room dimensions, ceiling height, glazing, direct sunlight, occupancy and heat-producing appliances affect the capacity you need. Incorrect pipework, insulation or installation clearances can also reduce cooling. Don't assume you need to replace your AC with a larger unit before checking these factors.

When to call an AC repair technician

Book a repair visit if cooling remains poor after you correct the settings and clean the filters, or if ice forms again. Stop using the AC immediately if you notice a burning smell, smoke, damaged wiring, water reaching electrical parts or repeated breaker tripping. Don't keep resetting the breaker.

Tell the technician whether airflow is weak, whether the outdoor unit starts, where you noticed ice and whether the problem began suddenly or gradually. Ask them to check airflow, coil cleanliness, fan operation, temperature sensors and electrical components before recommending replacement parts or refrigerant repairs. Request a clear diagnosis and repair estimate before you authorise the job.